• Axial fan for windows, wall or panel installation for medium and big domestic and commercial requirements.
• Suitable for installation in a single, double glazing window glass, panel or wall.
• With a concealed integral automatic louver shutter to avoid unpleasant back draughts to the room when the fan is not operating.
• Including two special gaskets to prevent window glass vibrations and as a good tight seal against rain.
• Easy and fast assembly and installation thanks to the reduced number of fixing screws and with an original clicking and plug-in system.
• The M (Manual) version is provided with a manual shutter mechanism through pull cord.
• The A (Automatic) version is provided with an automatic shutter mechanism which is extremely silenced and reliable.
• The R (Reversible) version allows to reverse the impeller rotation to extract and intake the air-flow.
• The Wall version is suitable for application inside wall.
• The Wi-Fi version is provided with a radio transmitter for functions operation.
• In accordance with EN 60335-2-80. .

Download the data sheet of this Product
 

• Fan provided with an energy recovery system

• Ideal for domestic applications

• Suitable for single room application

• Wall and/or panel application

• Body in white ABS with inner components in polypropylene

• Cross Flow Air Exchanger welded PVC plates

• Two centrifugal fans with sleeve bearings motors

• Filters in polyurethane to grant higher protection and longer function

• Every model equipped with ”operating warning light”

• Pre-heating system (PH model only) consists of a 350 W coil with thermostat, fitted in a box of self extinguishing material.

• Single speed

• 3 models available: Basic, Timer and Preheater for cold climates

• In accordance with EN 60335-2-80

• High performance in terms of balance between energy recovery, consumption, flow rate and noise level osità

Download the data sheet of this Product

• This is the SELV (Safety Extra Low Voltage) version working at 12V AC. of the axial fan model IN 10/4, designed to convey air and fumes directly outside.
• This fan can be installed within the saftey zones 1 and 2, as defined by the norm IEC 364-7 part 7, where the risk related to electrical connections is very high.
• The very low power voltage of the IN 10/4 SELV, in combination of a dedicated transformer supplied with the fan, permits the installation even in proximity of the bath tub or the shower, because the eventual direct contact with the fan does not pose any threat of electrical danger. The supply unit must be installed within zone 3.

Download the data sheet of this Product
 

• Centrifugal roof fans to extract air or fumes directly or from ducts.

• Medium - high flow rates with pressure to overcome pressure losses due to duct resistance.

• Induction motor on ball bearings, IP 55 protection, class F insulation and fitted with cooling impeller.

• Zinc-plated steel body and impeller, cover made in plastic material.

• Impeller statically and dinamically balanced.

• Safety protection grille.

• In accordance with the essential requirements of 89/392/CE directive concerning machines, and with European Standards EN 292 part I and II, UNI EN 294 and IEC 204-1 and 2.

• Some models can be regulated trough the controllers.

Download the data sheet of this Product